Viragri Plus VT49 20L - Desinfiointiaine

Tuotenumero 7510595
0 tuotearviota Kirjoita tuotearvio
Viruksia tappava, ei-hapettava aldehydipohjainen desinfiointiaine. • Viragri Plus is based on an optimised blend of glutaraldehyde and quaternary ammonium compound (QAC) in aqueous solution. It has been extensively tested in the laboratory and in-use, and shown to have broad-spectrum activity
Hinta
€ 205,52
ei sisällä veroja
Available on: Saapuu varastoon Varasto vähissä Varastossa
Tämä tuote ei ole tilattavissa tällä hetkellä
Tuotekuvaus
Viruksia tappava, ei-hapettava aldehydipohjainen desinfiointiaine.

• Viragri Plus is based on an optimised blend of glutaraldehyde and quaternary ammonium compound (QAC) in aqueous solution. It has been extensively tested in the laboratory and in-use, and shown to have broad-spectrum activity against bacteria, fungi and viruses of importance in the effective maintenance of animal health and hygiene. • Viragri Plus is designed as a terminal disinfectant for use after surfaces have been thoroughly cleaned and rinsed to remove all gross soil. It is recommended for use in agriculture, like animal housing, empty growing rooms and greenhouses, dismantled equipment, in boot dips and can be used on all surfaces and equipment found in animal housing, hatcheries and food industry applications. • Viragri Plus is suitable for soak, spray and fogging application.

Specially formulated for use in spray, soak of fogging applications. Bactericidal, virucidal and fungicidal action. Low corrosivity product, suitable for use on all surfaces including soft metals. Effective in hard and soft water areas.

Food Industry: Use Viragri Plus at concentrations between 0.25-1% (v/v) on cleaned surfaces depending on application. No direct food contact. Only for hard surfaces. Always rinse thoroughly after use with potable water. For full details, please refer for individual method cards. Agriculture: Use Viragri Plus normally at concentrations between 0.5-1% v/v on cleaned surfaces Animal Housing: Spray with a 0.5-1% v/v solution Dismantled equipment: Spray or dip using a 0.5-1% v/v solution Boot dips/wheel rinse: Use a 1-2% v/v solution, change daily Fogging: Prepare a stock solution according to recommendations of equipment supplier and apply at the rate of 0.5-2ml per m3 as neat product. For full details, please refer to individual method cards.
Tuotetiedot
General specifications
Logistical specifications
Chemical specifications
Tuotearviot (0)
Ei tuotearvioita.
    Lataa
    Lataa