Divosan Viragri Plus VT97 20L

Divosan Viragri Plus VT97 is a highly effective, non-oxidising disinfectant specially formulated for use on cleaned surfaces in the sectors where biocidal activity is required like agriculture (e.g. empty growing rooms and greenhouses), lairage and in some specific food industry applications.

• Divosan Viragri Plus VT97 is based on an optimised blend of glutaraldehyde and quaternary ammonium compound (QAC) in aqueous solution. It has been extensively tested in the laboratory and in-use, and shown to have broad-spectrum activity against bacteria, fungi and viruses of importance in the effective maintenance of animal health and hygiene.
• Divosan Viragri Plus VT97 is designed as a terminal disinfectant for use after surfaces have been thoroughly cleaned and rinsed to remove all gross soil. It is recommended for use in agriculture, like animal housing, empty growing rooms and greenhouses, dismantled equipment, and can be used on all surfaces and equipment found in animal housing, hatcheries and food industry applications.
• Divosan Viragri Plus VT97 is suitable for soak, spray and fogging application.

• Specially formulated for use in spray, soak of fogging applications.
• Bactericidal, virucidal and fungicidal action.
• Low corrosivity product, suitable for use on all surfaces including soft metals.
• Effective in hard and soft water areas.

Food Industry: Use Divosan Viragri Plus VT97 at concentrations between 0.5-6% (v/v) on cleaned surfaces depending on application. No direct food contact. Only for hard surfaces. Always rinse thoroughly after use with potable water. For full details, please refer for individual method cards.
Agriculture: Use Divosan Viragri Plus VT97 at 3% v/v on cleaned surfaces
Animal Housing: Spray with a 3% v/v solution
Dismantled equipment: Spray or dip using a 3% v/v solution
Wheel rinse: Use a 3% v/v solution, change daily
Fogging: Prepare a stock solution according to recommendations of the equipment supplier and use 6% for control of bacteria, yeast, fungi and use 20% for control of bacterial spores. Use at a contact time of 10 min for every 100 m3 area."